Specification :
Specification |
SL-340CR / SL-300CR / SL-300C |
Max. web width |
340 mm (SL-340CR)
320 mm (SL-300CR / SL-300C) |
Min. slitting width (mm) |
10 mm, 7 knife sets for standard
( special order to be requested ) |
Max. web rewind outer dia. (mm) |
Φ550 mm run around 1000 M ( special design to be requested ) |
Rewind shaft dia. |
75 mm |
Max. speed |
Connected on-line : As main machine
Working independently :
75 M / min (SL-300C working independently only) |
Power |
1/2 HP, 220 V / 50 (60) Hz |
Machine weight |
163 KG(N.W.), 245 KG(G.W.) |
Measurement |
1.5 CBM |
Advantages :
- Can be connected on-line with main machine or working independently.
(SL-300C working independently only)
- Equip on length and sheet amount sensors. Machine will stop automatically
when setting amount is achieved.
- Easy setting slitting knives no need to release then tighten by screws as
other machine to avoid knives angle not proper cause material wastage &
adjusting trouble or dangerous & damage due to operator forget to lock the
screws. The knives position can be adjusted while slitting thanks to the
smart device.
- Air blower is accompanied with machine to blow away the web waste trim edge.
Product
shaft can be used for different diameter.
- Adjustable Vacuum tension device to get clean trim tight roll. Unwind & rewind
product shafts can rewind the printed roll for 2nd pass use.
- Speed reducing program can be settled when the amount almost achieved to reduce the
slitting speed in order to save material wastage and machine longer life.
Applicable Material:
Art paper, mirror coat paper, foil paper, PET, PVC, PP, PE, electrostatic paper, hologram (laser) film, phosphoressent film, flockings paper, binding cloth, textile, garment, satin, ribbon, cardboard, kraft, crepe paper, polar film, diffuse film, silver reflect film, aluminum foil, laminate copper foil, Photoelectric film, Conductor film, soft pc plate, LCD conductor glue, shockproof glue, high tec. Laminate material, EMI insulator, sponge rubber, conductor sponge rubber, thermal paper, pe, plastic leather, thin film (IMD), nameplate, Heat transfer labels, glue side printing labels, security labels...etc materials in roll.
Standard Unit :
1. 7 knife sets (1 set for 1 upper & lower knife, min. slitting width 10 mm)
2. Diameter 75 mm rewind (product) shaft (reel)
3. Diameter 75 mm unwind shaft (reel)
4. Counting sensor
5.Speed reducing system
6.Adjustable Vacuum tension device
7. Wastage air blower
8. Tool kits for the machine
Optional Unit :
Additional slitting knife set (special style can be requested)
Additional different diameter product shaft, Air product shaft by same or different diameter
Demo VCR :
 off-line slitting
on-line slittin |
